Skimming to plasterboard and other solid surfaces is a popular method of providing a smooth, seamless finish ready for decoration. The plaster is normally applied to a 2 - 3mm thickness depending on the background you are working to.
Float and set
Preferred by masonry lovers, either sand and cement renders or gypsum backing plaster are trowelled directly onto brick or block work. Both are finished off with a tight coat of finishing plaster that can be decorated.
Dot and Dab (Drilyner Basic)
Dot and dab is a simple and quick way to directly bond plasterboard to solid walls. Once set, the boards are ready for tape and jointing or skimming.
Skimming Over Artex Ceilings
This involves lightly scraping back any high spots of the textured pattern, then sealing the entire surface with a sealant agent. Once dry, two coats of finishing plaster are applied and worked to a smooth finish ready for painting (please note that the plaster must be completely dry before decoration).
Patching and Repairs
Often small damaged areas can be repaired and patched into existing plaster to avoid replastering whole walls or ceilings. A visit to your home is required to determine whether or not his can be done.
Replacement of Old or Damaged Ceilings
Removing old ceilings can be a messy job, however, with our site visit and guide to preparing your home the process does run smoothly. Old ceilings are taken down and bagged ready for your disposal. Joists are de-nailed and new gyproc plasterboard is screwed into place ready for plastering.
We can supply and fit a range of decorative gyproc cove and cornice to frame and enhance your wall and ceiling lines.
Installation of Plasterboard and Stud Wall Partitioning
Plasterboard is an inner layer of gypsum sandwiched between two outer layers of lining paper. Including various additives in the gypsum layer and varying the weight and strength of the lining paper will give the finished board different properties - available among others as soundbloc, moisture resistant and fire proof board.
Internal walls can be made up of a timber frame with plasterboard attached on top. It's quick to construct, lightweight and strong. The semi-hollow nature of studwork construction also means that pipes and wires can be run within the wall where needed. Stud wall partitioning can be used to divide up a large space and to box in pipes.
See all Ellan Vannin Plastering & Rendering Services.
We serve all locations in Essex. These includes Romford, Brentwood, Chelmsford, Southend, Colchester, and all other towns in Essex. We also cover most parts of London, Kent, Surrey, Sussex and Hertfordshire.See More
plasterboard | screed | dry lining | plaster of paris | plasterer | plaster board | drywall | floor screed | damp course | acoustic plasterboard | polished plaster | ceiling coving | bonding plaster | plasterers | render mix | multi finish plaster | lime plaster | screeding | venetian plaster | plaster ceiling rose | lime render | hardwall plaster | plastering sand | render board | patching plaster | drywall sander | lime wash | painting on plaster | plaster sealer | silicone render | rendered houses | wall rendering | external render | renovating plaster | plastering over artex | plaster boards | plaster mouldings | ready mixed plaster | lath and plaster | one coat plaster | limewash | painting plaster | hairline cracks in plaster | plaster board fixings | fibrous plaster | ceiling plasterboard | one coat render | skim coat plaster | plaster moulds | lath and plaster ceiling | undercoat plaster | plastering beads | decorative plaster | removing paint from plaster | plaster dado rail | plaster mesh | plaster screws | casting plaster | plastering prices | plaster primer | acrylic render | rendering a house | easy fill plaster | house rendering | coloured render | plaster coving | screed mix | heat resistant plaster | finishing plaster | skimming plaster | spray plaster | floor screeding | plaster repair | wall plaster | external plaster | roll on plaster | brick render | Italian plaster